1. 
      

      <font id="j6wdi"></font>
      <progress id="j6wdi"><xmp id="j6wdi"></xmp></progress>
      <samp id="j6wdi"><sup id="j6wdi"></sup></samp>

      Products Details
      Current Location : HomePage > PRODUCTS
      Crushing &De-dust Recycle Machine

      Technical Specification



      size

      refer to: connecting diagram



      weight

      1600kg



      working voltage

      380v  50Hz(according to customer’s requirments)



      installed power

      ≈15.4kw



      material pipe:

      DN100






      capacity/ time

      6mm sieve pore (moulding)

      5-6m3 /h  

      10mm  sieve pore (block)

      8-9m3/h

      area :

      6.7m2

      volume

      L×W×H

      Pre-crashing/grain generation/de-dust system

      2.0×1.9×1.9m

      Dust and filter system

      1.5×0.9×4.0 m

      Hopper hatch on the top

      712×685mm

      connect pipes

      DN100

      Spendable EPS material after recycling

      ≥95

      Powder and particle after separated:

      5

      Powder content after de-dust

      1

      Installed power

      pre-crushing unit

      2.2KW

      grain making unit

      7.5KW

      Powder Separating system

      5.5KW

      filter system

      0.12KW


      Crushing &De-dust Recycle Machine is a new idea on recycling EPS products. It peels the EPS beads from the products instead of traditional crushing way. Then mill the beads round and de-duster. The recycled material can be mixed with the fresh material in the shape molding machines and block molding machines directly. It will save about USD 720 from one ton recycled EPS products.

      The 97% percentage of recycled material is usable and only 3% percentage becomes to dust which will be collected in a special dust collector silo.
       
      The recycled material can be 10-15% mixed with fresh material when producing pakage products. The recycled material can be 15-30% mixed with fresh material when producing block products. It will not affect the surface and inner quality of the products. It’s difficult to find the difference between the products made from mixed material and total frshe material. It’s the best solution for a styrofoam factory combined with block molding machine and shape molding machine.
      previous item: Extrusion Pelletizer Line next item: EPS?3D?Panel?Line
      男人天堂av